Hub Assembly Replacement Cost

The wheel hub assembly is what holds the wheels in place. It helps with turning, assists the ABS and even boosts fuel efficiency. Over time, excessive wear on the wheel assembly will cause it to break down and wear out. We’ll show you what it costs to have it replaced and what you can expect during the replacement process.

You will pay from $130 to $550 for hub assembly replacement. The labor should cost you about $70-$90, while parts will run between $65 to $400.

Hub Assembly Replacement Cost Comparison

Your Mechanic

Midas

Mr. Tire

NAPA

Walmart

Amazon

What Is Hub Assembly Replacement?

While the hub assembly replacement is straightforward, it can take a while, and it often requires some specialized tools to get done. If the problem persisted for a while and nothing was done about it, then there may be damage to the wheels, axle and other car parts that will drive up the cost of repairs. That’s why it is so important to have this replacement service done as soon as you realize there is a problem.

Benefits of Hub Assembly Replacement

When you get the wheel hub assembly replaced, you will enjoy better control over your steering and a smoother ride. If the wheel assembly is too damaged, you may not be able to drive at all, so getting it fixed means that you can operate your car again.

You will also experience better fuel efficiency, saving money over time, so even if this isn’t a big problem at first, it will cost you the longer you wait to have it fixed.

What Is Done during Hub Assembly Replacement?

The mechanic will have to raise up the vehicle on a jack and then take off the wheels. The old, damaged wheel hub will then be removed, and the new one will be installed in its place. After that, the mechanic will road test the vehicle to see how it performs.

When to Get a Hub Assembly Replacement

If the wheel assembly starts to break down, it can come loose from the axle, making for a serious safety hazard. You shouldn’t drive your car when you have a wheel assembly problem. There’s a chance that the problem has been going on for a while and you just didn’t notice it. It’s best to have the vehicle towed to a mechanic before the issue becomes worse.

The rougher the vehicle is driven, the quicker the wheel assembly will start to have problems. You should pay attention to any symptoms of wheel assembly problems that may indicate a replacement is required. Your steering may seem loose, or you may have a hard time gettogether vehicle to turn. You may also hear a grinding or a whirring noise at the front of the vehicle, near the hubcap. You may also have some trouble getting the vehicle to stop when pressing the brakes. These are signs that it is time to have the wheel assembly looked at right away.

How to Save Money on Hub Assembly Replacement

It’s best if you leave this repair up to the experts. While many people try to complete car repair jobs as DIY projects, out’s probably not a good idea for this one, since it requires specialized tools that most people don’t have. If you do have the tools and the experience to handle it, though, then save some money doing it yourself.

Since this can be an expensive repair, we suggest trying to save money by shopping around for the best rate. Look at a few different mechanics to get the best deal on parts and labor.

Sample Hub Assembly Replacement Costs