Find recalls for your vehicle


Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Recall #90V095000 (05/09/1990)

  • Component: SEAT BELTS:FRONT:ANCHORAGE
  • Summary: SAFETY BELTS MAY NOT EXTEND EASILY FROM THEIR RETRACTORS WHEN VEHICLE IS PARKED ON SLIGHT SLOPE AS REQUIRED BY FMVSS 208. REAR STOP LIGHTS AND TURN SIGNALS DO NOT MEET MINIMUM PHOTOMETRIC STRENGTH, AND FRONT TURN INDICATOR – SIDE MARKER LIGHTS ARE BELOW HEIGHT REQUIRED BY FMVSS 108. WARNING LABEL (NEAR FILLER OF BRAKE FLUID RESERVOIR) TO CLEAN FILLER CAP BEFORE REMOVING MAY BE MISSING, WHICH VIOLATES REQUIREMENT OF FMVSS 105. INSIDE WINDSCREEN MOULDING MAY BE TOO HIGHLY REFLECTIVE AND NOT IN COMPLIANCE WITH FMVSS 107.
  • Consequence: NON-WORKING SEAT BELTS COULD CONTRIBUTE TO INJURY TOVEHICLE OCCUPANT IN SUDDEN STOP OR ACCIDENT. INSUFFICIENT PHOTOMETRIC STRENGTHOF THE BRAKE AND REAR SIGNAL LIGHTS COULD LEAD TO A VEHICLE COLLISON. THEMISSING WARNING LABEL ON THE OIL FILLER CAP COULD LEAD TO IMPROPER MAINTENANCE,AND RESULT IN AN UNDERHOOD FIRE.
  • What owners should do: REPAIR VEHICLE TO ASSURE ALL THE DEFECTS MENTIONED ARE CORRECTED.

Recall #11V054000 (01/20/2011)

  • Component: STRUCTURE:FRAME AND MEMBERS
  • Summary: MORGAN IS RECALLING CERTAIN MODEL YEAR 2010 PENSKE VEHICLES. THE "Z" MOUNTING BRACKETS, WHICH SUPPORT THE VAN BODY ABOVE THE CHASSIS, ARE SUBJECT TO BENDING AND, IN EXTREME CASES, INDIVIDUALLY ARE SUBJECT TO BREAKING. IF MULTIPLE "Z" MOUNTING BRACKETS BREAK, THE PARCEL VAN BODY MAY LOWER ONTO THE CHASSIS FRAME RAIL. THE PARCEL VAN BODY TOUCHING THE FRAME RAIL MAY CAUSE INTERFERENCE BETWEEN THE WALK RAMP AND THE FUEL LINE, AND MAY PULL AWAY FROM THE CHASSIS CAB.
  • Consequence: SEVERE OVERLOADING COULD CAUSE THE BRACKETS TO BREAK INCREASING THE RISK OF A CRASH.
  • What owners should do: DEALERS WILL REPLACE ALL OF THE "Z" MOUNTING BRACKETS FREE OF CHARGE. THE SAFETY RECALL BEGAN IN IN MAY 2010. OWNERS MAY CONTACT MORGAN AT 1-610-286-2223.

Recall #13V313000 (07/16/2013)

  • Component: SERVICE BRAKES, HYDRAULIC:FLUID
  • Summary: Morgan 3 Wheeler Limited (Morgan) is recalling certain model year 2012-2013 three-wheeled motorcycles manufactured between October 2012 and July 2013. The brake fluid reservoir does not have a brake fluid reservoir filling warning statement. Thus, these vehicles fail to conform to the requirement of Federal Motor Vehicle Safety Standard (FMVSS) No. 122, "Motorcycle Brake Systems."
  • Consequence: The operator may not be warned of the brake fluid reservoir filling requirements, which may result in a reduction of brake performance, increasing the risk of a crash.
  • What owners should do: Morgan will notify owners and dealers will apply a brake fluid reservoir filling warning label, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Morgan's US Agent at 1-505-570-1845.

Recall #13V313000 (07/16/2013)

  • Component: EQUIPMENT:OTHER:LABELS
  • Summary: Morgan 3 Wheeler Limited (Morgan) is recalling certain model year 2012-2013 three-wheeled motorcycles manufactured between October 2012 and July 2013. The brake fluid reservoir does not have a brake fluid reservoir filling warning statement. Thus, these vehicles fail to conform to the requirement of Federal Motor Vehicle Safety Standard (FMVSS) No. 122, "Motorcycle Brake Systems."
  • Consequence: The operator may not be warned of the brake fluid reservoir filling requirements, which may result in a reduction of brake performance, increasing the risk of a crash.
  • What owners should do: Morgan will notify owners and dealers will apply a brake fluid reservoir filling warning label, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Morgan's US Agent at 1-505-570-1845.

Recall #13V313000 (07/16/2013)

  • Component: SERVICE BRAKES, HYDRAULIC:FLUID
  • Summary: Morgan 3 Wheeler Limited (Morgan) is recalling certain model year 2012-2013 three-wheeled motorcycles manufactured between October 2012 and July 2013. The brake fluid reservoir does not have a brake fluid reservoir filling warning statement. Thus, these vehicles fail to conform to the requirement of Federal Motor Vehicle Safety Standard (FMVSS) No. 122, "Motorcycle Brake Systems."
  • Consequence: The operator may not be warned of the brake fluid reservoir filling requirements, which may result in a reduction of brake performance, increasing the risk of a crash.
  • What owners should do: Morgan will notify owners and dealers will apply a brake fluid reservoir filling warning label, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Morgan's US Agent at 1-505-570-1845.

View all of the recalls for Morgan. We will help you identify any recalls issued for your vehicle and help you find a local service center. Find a shop near you.