Shift Solenoid Replacement Cost

To change gears, your vehicle likely uses pressurized hydraulic fluid. This fluid is sent to the appropriate location by the shift solenoid, which is activated every time you change gears on your vehicle. If you are having trouble changing gears, it may be time to replace the solenoids, and we are going to look at how much that costs and what the replacement process is.

To replace the shift solenoid, you can expect to pay $150-$400 for a single solenoid replacement. The cost goes up for each subsequent solenoid that is damaged and needs to be replaced. The parts should only cost you $15-$100 for each solenoid.

Shift Solenoid Replacement Cost Comparison

Your Mechanic

Work	Warranty	Price
Parts & Labour	12 months	$153-$379

 

Midas

Work	Warranty	Price
Parts & Labour	12 months	$145-$366

 

Mr. Tire

Work	Warranty	Price
Parts & Labour	12 months	$167-$379

 

NAPA

Work	Warranty	Price
Parts & Labour	24 months	$121-$450

 

Walmart

Work	Warranty	Price
Parts	Limited	$86-$194

 

Amazon

Work	Warranty	Price
Parts	Limited	$72-$145

What Is Shift Solenoid Replacement?

However, once the mechanic gets under the hood, he may find that several of the solenoids need to be replaced. That’s going to increase your parts cost and labor costs. On average, it takes about three hours to replace a solenoid. It won’t take that long for each solenoid to be replaced, but each subsequent one that needs to be replaced will add to the labor time and costs. There may be other parts that need to be changed out, cleaned or repaired at the same time, and your mechanic might not know about all these until he has time to examine your vehicle.

Benefits of Shift Solenoid Replacement

After you get your shift solenoids replaced, then your car is going to operate so much better. You will be able to shift gears and control the car more freely. You will also be able to drive safer, and your car will be more reliable for you. It’s simply not safe to drive when the solenoids are malfunctioning, so it’s in your best interests to have this issue dealt with as soon as possible.

Beyond just driving safer and enjoying more control, you will also protect your transmission and related parts from undue wear and tear.

What Is Done during Shift Solenoid Replacement?

The mechanic may scan the car’s computer first to find out what the issue is and then locate the solenoid. That component could be located at one of any number of places. Once he has located it, he will drain out the transmission fluid, remove the transmission tank and disconnect the electrical wires from the solenoid. Then the new solenoid or solenoids can be put in place and the electrical wires reconnected. After that, the mechanic can put the transmission fluid tank back in place and refill the tank. Once everything is back where it should be, he will clear the error codes and test out the car.

When to Get Shift Solenoid Replacement

You may not be able to drive the car very well or at all when one or all of your shift solenoids start to give out. The gears may not change when you try to change them, or they could just be stuck in neutral. Your car may also lag when shifting gears, meaning that once you shift the gear stick, the gears may notactually change over for a few moments. You may also experience a problem where the car shifts to the wrong gear when you change gears.

All of this makes for serious problems that can affect your safety and control when driving the car. It’s best to have the vehicle towed when that happens. Before any of that happens or perhaps at the same time it is happening, you may notice a check engine light on your dashboard. That’s not something you want to ignore, as it can often signal serious problems that you may not notice right away.

How to Save Money on Shift Solenoid Replacement

Are you trying to find some ways to cut your costs and avoid all the mechanic fees and labor costs? You may be tempted to do the repairs yourself, but unless you have a way to clear the error codes from your car’s computer, that’s not going to be a very effective way to fix this. You could always replace the solenoids and then just hire a mechanic to clear the error codes for you as a way to save money, but you need to ensure that you diagnose the problem correctly.

Other ways to save money include comparing the cost of the labor and sourcing the parts on your own. Either of these can net you a better deal, but you have to put some effort into sourcing prices and comparing rates to enjoy the biggest savings.

Sample Shift Solenoid Replacement Costs

Model	Labor	Parts	Total
Ford F-Series	$62-$103	$91-$91	$153-$194
Chevrolet Silverado	$116-$149	$211-$211	$327-$360
Toyota Camry	$62-$103	$91-$91	$153-$194
Toyota Corolla	$62-$103	$91-$91	$153-$194
Nissan Altima	$44-$80	$79-$79	$123-$159
Honda CR-V	$80-$103	$131-$152	$211-$255
Honda Civic	$80-$103	$131-$152	$211-$255
Honda Accord	$80-$103	$131-$152	$211-$255
Ford Fusion	$62-$103	$91-$91	$153-$194